Equilibrium and kinetic modeling of Cr(VI) removal by novel tolerant bacteria species along with zero-valent iron nanoparticles.

This work describes the study of the removal of a refractory contaminant, i.e., Hexavalent chromium (Cr(VI)) from aqueous systems by a novel adsorbent comprising Cr(VI) tolerant bacteria and zero valent iron nanoparticle (nZVI). A gram-positive, rod-shaped bacteria used in the study were isolated from wastewater (WW) received from the effluent of leather industries. The adsorbents were prepared with bacteria, nZVI alone, and a combination of both. The adsorbent comprising both elements was found to remove Cr(VI) with a higher percentage (93%) and higher capacities (0.58 mg/g) as compared to adsorbent with bacteria (Cr(VI) removal = 63%, qe = 0.163 mg/g) or nanoparticles (Cr(VI) removal = 80%, qe = 0.45 mg/g) alone. The adsorbent worked best at neutral pH, and the removal became saturated after 90 min of incubation. Equilibrium studies with isotherm modeling suggested that the adsorption process follows sips isotherm (R2 = 0.9955), which is expected to bean intra-particle diffusion process before the actual adsorption. Process kinetics was modeled with pseudo-first order, pseudo-second order, and Vermeulen model. The diffusion coefficient determined by fitting the kinetic data to Vermeulen model was found to be 0.0000314 cm2/s. The adsorbent can be tested further for continuous flow processes to find more insights about the usage on a large scale.

Identification of prevalent leachate percolation of municipal solid waste landfill: a case study in India.

Landfill leachate forms when waste-inherent water and percolated rainfall transfer are highly toxic, corrosive, acidic, and full of environmental pollutants. The release of leachate from municipal solid waste (MSW) landfill sites poses a severe hazard to human health and aquatic life. This study examined the impact of leachate from Delhi's Ghazipur landfill on the nearby groundwater quality. Analysis of leachate samples was done to determine various parameters such as total dissolved solids (TDS), hardness, alkalinity, electrical conductivity, pH, BOD5, COD, nitrate, sulphate, chloride and iron, and presence of coliform bacteria. Significant dissolved elements (22,690-34,525 mg/L) were observed in the samples, indicated by the high conductivity value (1156-1405 mho/cm). However, a stable pH range (6.90-7.80) of leachate samples was observed due to high alkalinity concentrations between 2123 and 3256 mg/L. The inverse distance weighing (IDW) interpolation tool from QGIS 3.22.7 developed spatial interpolated models for each parameter across the Ghazipur area. The IDW interpolated graphs of various parameters over the whole study area confirmed these contaminations. In addition, leachate and groundwater samples were physio-chemically analyzed, and temporal fluctuation in landfill waste has also been studied. The temporal fluctuation results showed that when heat is produced, transmitted, and lost throughout the waste system, the maximum temperature position fluctuates over time. The findings of this study highlight the critical importance of landfill management in reducing groundwater contamination from MSW leachate.

Heart transplantation in a patient with infective endocarditis bridged with Impella 5.5: a case report.

Background: Infective endocarditis (IE) is a feared complication after surgical valve replacement accounting for 10% to 30% of all cases of IE. Our case is unique as we present a decompensated heart failure patient with IE who urgently needed mechanical circulatory support (MCS) to stabilize while IE was treated. We used Impella to bridge him to sterile state before heart transplant was done. This case highlights the importance of different strategies for bridge to heart transplant in decompensated heart failure patients with endocarditis. Case summary: We describe a case of 62-year-old male who initially presented with severe shortness of breath with minimal exertion, weight gain, and lower extremity oedema diagnosed with acute on chronic systolic heart failure (HF) exacerbation (ACC stage D, NYHA class IV). Initial blood cultures and extensive work-up for IE were negative. He continued to decompensate haemodynamically despite inotropic support and the decision was to proceed with durable left ventricular assist device (LVAD) as bridge to orthotopic heart transplantation (OHT). Immediately prior to LVAD implantation, patient's blood cultures became positive for Cutibacterium acnes. Echocardiogram revealed IE on bioprosthetic aortic valve. Patient therefore underwent urgent aortic valve replacement (AVR) and was stabilized with Impella 5.5. Discussion: We highlight a case where MCS with Impella was used as a bridge to transplant in a decompensated HF patient who was septic. Patient was listed for OHT but was found to be septic due to IE and had to undergo AVR to achieve infection source control prior to undergoing heart transplant. Impella was used effectively to stabilize ACC stage D/NYHA class IV patient while he recovered from AVR and endocarditis before his blood cultures cleared up and he was listed for OHT. He successfully underwent OHT after 3 weeks.

How Do Patients and Otolaryngologists Define Dizziness?

OBJECTIVE: To assess for differences in how patients and otolaryngologists define the term dizziness. METHODS: Between June 2020 and December 2022, otolaryngology clinicians and consecutive patients at 5 academic otolaryngology institutions across the United States were asked to define the term "dizziness" by completing a semantics-based questionnaire containing 20 common descriptors of the term within 5 symptom domains (imbalance-related, lightheadedness-related, motion-related, vision-related, and pain-related). The primary outcome was differences between patient and clinician perceptions of dizzy-related symptoms. Secondary outcomes included differences among patient populations by geographic location. RESULTS: Responses were obtained from 271 patients and 31 otolaryngologists. Patients and otolaryngologists selected 7.7 ± 3.5 and 7.1 ± 4.3 symptoms, respectively. Most patients (266, 98.2%) selected from more than 1 domain and 17 (6.3%) patients identified symptoms from all 5 domains. Patients and clinicians were equally likely to define dizziness using terms from the imbalance (difference, -2.3%; 95% CI, -13.2%, 8.6%), lightheadedness (-14.1%; -29.2%, 1.0%), and motion-related (9.4; -0.3, 19.1) domains. Patients were more likely to include terms from the vision-related (23.6%; 10.5, 36.8) and pain-related (18.2%; 10.3%, 26.1%) domains. There were minor variations in how patients defined dizziness based on geographic location. CONCLUSIONS: Patients and otolaryngologists commonly described dizziness using symptoms related to imbalance, lightheadedness, and motion. Patients were more likely to use vision or pain-related terms. Understanding of these semantic differences may enable more effective patient-clinician communication.

Trace element pollution tracking in the complex multi-aquifer groundwater system of Al-Hassa oasis (Saudi Arabia) using spatial, chemometric and index-based techniques.

In a global context, trace element pollution assessment in complex multi-aquifer groundwater systems is important, considering the growing concerns about water resource quality and sustainability worldwide. This research addresses multiple objectives by integrating spatial, chemometric, and indexical study approaches, for assessing trace element pollution in the multi-aquifer groundwater system of the Al-Hassa Oasis, Saudi Arabia. Groundwater sampling and analysis followed standard methods. For this purpose, the research employed internationally recognized protocols for groundwater sampling and analysis, including standardized techniques outlined by regulatory bodies such as the United States Environmental Protection Agency (USEPA) and the World Health Organization (WHO). Average values revealed that Cr (0.041) and Fe (2.312) concentrations surpassed the recommended limits for drinking water quality, posing serious threats to groundwater usability by humans. The trace elemental concentrations were ranked as: Li < Mn < Co < As < Mo < Zn < Al < Ba < Se < V < Ni < Cr < Cu < B < Fe < Sr. Various metal(loid) pollution indices, including degree of contamination, heavy metal evaluation index, heavy metal pollution index, and modified heavy metal index, indicated low levels of groundwater pollution. Similarly, low values of water pollution index and weighted arithmetic water quality index were observed for all groundwater points, signifying excellent groundwater quality for drinking and domestic purposes. Spatial distribution analysis showed diverse groundwater quality across the study area, with the eastern and western parts displaying a less desirable quality, while the northern has the best, making water users in the former more vulnerable to potential pollution effects. Thus, the zonation maps hinted the necessity for groundwater quality enhancement from the western to the northern parts. Chemometric analysis identified both human activities and geogenic factors as contributors to groundwater pollution, with human activities found to have more significant impacts. This research provides the scientific basis and insights for protecting the groundwater system and ensuring efficient water management.

The impact of heavy metal concentrations on aquatic insect populations in the Asan Wetland of Dehradun, Uttarakhand.

This study, centered on the Asan Wetland in Uttarakhand, examines the ecological impact of heavy metals on aquatic insects biodiversity. It highlights the detrimental effects of metals like chromium, mercury, and lead, stemming from natural and anthropogenic sources, on aquatic insects diversity. Aquatic insects, particularly sensitive to water quality, are emphasized as key indicators of environmental health, illustrating the importance of understanding and managing the influences on wetland ecosystems. Wetland ecosystems are vulnerable to various environmental stressors, including pollution from heavy metals. These toxic substances can alter water quality parameters, disrupt nutrient cycling, and negatively impact the biodiversity and ecological balance of the system. This study aimed to evaluate the impact of several heavy metals (namely Cd, As, Cu, Fe, Pb, Ni, Zn, Al, Cr) on the distribution and biodiversity of various aquatic insect species, including Coeleoptera, Diptera, Ephemeroptera, Odonata, Plecoptera, and Trichoptera. The research utilized data collected between November 2021 and October 2022 from specifically chosen sites (S1, S2, S3) within the Asan Wetland in Dehradun, Uttarakhand. After collecting and identifying samples, various statistical (Sorenson, Shannon-Weiner diversity index, Margelef index) and multivariate tests (CCA, PCA, One-way Anova), have been applied to show the effects of these parameters. This study offers significant findings regarding the distribution patterns of heavy metals, the abundance of aquatic insects, and their interconnectedness within the ecosystem of the Asan Wetland. The abundance of aquatic insects, represented by 13 genera belonging to 6 orders, was assessed at three different sites (S1, S2, and S3) within the wetland. It was concluded that the heavy metals concentration and aquatic insects' density increases and decreases vice-versa in monsoon and winter seasons might be due to unfavourable factors. These findings contribute to the understanding of ecological dynamics and potential impacts of heavy metals on aquatic biota in wetland environments.

Are you congested? A comparison of definitions between otolaryngologists and their patients.

OBJECTIVE: To assess for differences of intended meaning in the description of congestion-related symptoms among otolaryngology patients and clinicians. MATERIALS AND METHODS: Between June 2020 and October 2022, a questionnaire consisting of 16 common descriptors of congestion-related symptoms within four domains (obstructive-related, pressure-related, mucus-related, and other symptoms) was completed by patients and otolaryngologists at five tertiary otolaryngology practices. The primary outcome was to assess differences in patient and clinician perceptions of congestion-related symptoms. Differences based on geographic location was a secondary outcome. RESULTS: A total of 349 patients and 40 otolaryngologists participated. Patients selected a median of 6.8 (standard deviation [SD] 3.0) terms compared with 4.0 (SD 1.6) terms for otolaryngologists (p < 0.001). Otolaryngologists were more likely to select obstruction-related symptoms (difference 6.3%; 95% confidence interval [CI] 3.8%, 8.9%). Patients were more likely to describe congestion using pressure-related (-43.7%; -58.9%, -28.5%), mucus-related (-43.5%; -59.3%, -27.8%), and other symptoms (-44.2; -51.3%, -37.1%) compared with otolaryngologists. There were no significant differences identified based on geographic location with regard to symptom domains on multivariate analysis. CONCLUSIONS: There are differences between otolaryngologists and their patients in the interpretation of the symptoms of congestion. Clinicians tended to have a narrower interpretation of congestion that was limited to the obstruction-related symptom domain, while patients defined congestion more broadly. This has important counseling and communication implications for the clinician.

Nanocellulose: A comprehensive review investigating its potential as an innovative material for water remediation.

Rapid growth in industrialization sectors, the wastewater treatment plants become exhausted and potentially not able to give desirable discharge standards. Many industries discharge the untreated effluent into the water bodies which affects the aquatic diversity and human health. The effective disposal of industrial effluents thus has been an imperative requirement. For decades nanocellulose based materials gained immense attraction towards application in wastewater remediation and emerged out as a new biobased nanomaterial. It is light weighted, cost effective, mechanically strong and easily available. Large surface area, versatile surface functionality, biodegradability, high aspect ratio etc., make them suitable candidate in this field. Majorly cellulose based nanomaterials are used in the form of cellulose nanocrystals (CNCs), cellulose nanofibers (CNFs), or bacterial nanocellulose (BNC). This review specifically describes about a variety of extraction methods to produced nanocellulose and also discusses the modification of nanocellulose by adding functionalities in its surface chemistry. We majorly focus on the utilization of nanocellulose based materials in water remediation for the removal of different contaminants such as dyes, heavy metals, oil, microbial colony etc. This review mainly emphasizes in ray of hope towards nanocellulose materials to achieve more advancement in the water remediation fields.

Removing polyfluoroalkyl substances (PFAS) from wastewater with mixed matrix membranes.

Polyfluoroalkyl and perfluoroalkyl (PFAS) chemicals are fluorinated and exhibit complicated behavior. They are determined and highly resistant to ecological modifications that render plants ecologically robust. Thermal stability and water and oil resistance are examples of material qualities. Their adverse consequences are causing increasing worry due to their bioaccumulative nature in humans and other creatures. Direct data indicates that PFAS exposure in humans causes endocrine system disruption, immune system suppression, obesity, increased cholesterol, and cancer. Several PFASs are present in drinking water at low doses and may harm people. These cancer-causing PFAS have caused concern for water bodies all around the globe. Analytical techniques are used to identify and measure PFAS in an aqueous medium (membrane). Furthermore, a deeper explanation is provided for PFAS removal methods, including mixed matrix membrane (MMM) technology. By removing over 99 % of the PFAS from wastewater, MMMs may effectively remove PFAS from sewage when the support matrix contains adsorbing components. Furthermore, we consider several factors affecting the removal of PFAS and practical sorption methods for PFAS onto various adsorbents.

Genetic variations among the isolates of Bipolaris Maydis based on phenotypic and molecular markers

Abstract Maydis leaf blight, caused by Bipolaris maydis, is an important disease of maize crop in Khyber Pakhtunkhwa (KP) Pakistan. Fifteen isolates of the pathogen, collected across KP, were studied for variability based on phenotypic and molecular markers. Significant variability among the isolates was observed when assessed using phenotypic traits such as radial growth, spore concentration, fungicide sensitivity and virulence. The isolates were classified into six culture groups based on colour, texture and margins of the colony. Conidial morphology was also variable. These were either straight or slightly curved and light to dark brown in colour. Fungicide test showed significant variation in the degree of sensitivity against Carbendazim. Isolate Bm8 exhibited maximum radial growth on carbendazim spiked plates. Conversely, isolate Bm15 showed the lowest radial growth. Variations in virulence pattern of the isolates were evident when a susceptible maize variety Azam was inoculated with spores of B. maydis. Genetic variability amongst the isolates was also estimated by RAPD as well as sequencing of ITS region. The RAPD dendrogram grouped all the isolates into two major clusters. Average genetic distance ranged from 0.6% to 100%, indicating a diverse genetic gap among the isolates. Maximum genetic distance was found between isolates Bm9 and Bm10 as well as Bm2 and Bm8. Conversely, isolates Bm13 and Bm15 were at minimum genetic distance. Phylogenetic dendrogram based on sequencing of ITS region grouped all the isolates into a single major cluster. The clusters in both the dendrogram neither correlate to the geographical distribution nor to the morphological characteristics.

Resumo A ferrugem das folhas de maydis, causada por Bipolaris maydis, é uma doença importante da cultura do milho em Khyber Pakhtunkhwa (KP), Paquistão. Quinze isolados do patógeno, coletados em KP, foram estudados quanto à variabilidade com base em marcadores fenotípicos e moleculares. Variabilidade significativa entre os isolados foi observada quando avaliada por meio de características fenotípicas, como crescimento radial, concentração de esporos, sensibilidade a fungicida e virulência. Os isolados foram classificados em seis grupos de cultura com base na cor, textura e margens da colônia. A morfologia dos conídios também foi variável. Estes eram retos ou ligeiramente curvos e de cor marrom-claro a escuro. O teste de fungicida mostrou variação significativa no grau de sensibilidade ao carbendazim. O isolado Bm8 exibiu crescimento radial máximo em placas com adição de carbendazim. Por outro lado, o isolado Bm15 apresentou o menor crescimento radial. As variações no padrão de virulência dos isolados foram evidentes quando uma variedade de milho suscetível Azam foi inoculada com esporos de B. maydis. A variabilidade genética entre os isolados também foi estimada por RAPD, bem como sequenciamento da região ITS. O dendrograma RAPD agrupou todos os isolados em dois grupos principais. A distância genética média variou de 0,6% a 100%, indicando uma lacuna genética diversa entre os isolados. A distância genética máxima foi encontrada entre os isolados Bm9 e Bm10 e também entre Bm2 e Bm8. Por outro lado, os isolados Bm13 e Bm15 estavam a uma distância genética mínima. O dendrograma filogenético baseado no sequenciamento da região ITS agrupou todos os isolados em um único aglomerado principal. Os agrupamentos em ambos os dendrogramas não se correlacionam com a distribuição geográfica nem com as características morfológicas.

Multi criteria analysis of municipal solid waste management and resource recovery in Poland compared to other EU countries.

Statistics show that the inhabitants of Poland are producing increasingly more household waste. This article attempts to determine the current level of development of Poland in the field of waste management concerning other EU countries and partner countries; identify trends in the mass of generated, segregated, and mixed municipal waste; and obtain an idea of the attitude of the Polish population toward sorting waste at the source to bring the country to a higher level of waste management. The empirical base is statistical data published on the website of the EU Data Explorer and the Central Statistical Office. The ranking of countries was determined by the TOPSIS method using a synthetic indicator based on the selected diagnostic features. The significance of the obtained ranks was tested using the non-parametric Friedman test (p < 0.01). We established that Poland has been consistently ranked 16th-17th over the past 5 years. Unfortunately, thus far, no systematic approach has been found to raise citizens' awareness, which may be due to the lack of the necessary amount of data. Researchers recommend investigating the sensitivity of the relationship between the generation of alternative energy from waste and the authorities' action.

Green and sustainable synthesis of CaO nanoparticles: Its solicitation as a sensor material and electrochemical detection of urea.

Urea is recognized as one of the most frequently used adulterants in milk to enhance artificial protein content, and whiteness. Drinking milk having high urea concentrations which causes innumerable health disputes like ulcers, indigestion, and kidney-related problems. Therefore, herein, a simple and rapid electroanalytical platform was developed to detect the presence of urea in milk using a modified electrode sensor. Calcium oxide nanoparticles (CaO NPs) were green synthesized and used as a catalyst material for developing the sensor. Synthesized materials formation was confirmed by different techniques like FTIR, UV-visible, XRD, SEM-EDX, and Raman spectroscopy. The carbon paste electrode (CPE) was modified using the CaO NPs and used as a working electrode during the analysis followed by cyclic voltammetry and differential pulse voltammetry (DPV) techniques. The fabricated calcium oxide modified carbon paste electrode (CaO/CPE) successfully detected the presence of urea in the lower concentration range (lower limit of detection (LLOD) = 0.032 µM) having a wide linear detection range of 10-150 µM. Adsorption-controlled electrode process was achieved at the scan rate variation parameter. The leading parameters like the selectivity, repeatability, and stability of the CaO/CPE were investigated. The relative standard deviation of sensor was ± 3.8% during the interference and stability study.

Geospatial distribution and machine learning algorithms for assessing water quality in surface water bodies of Morocco.

Surface waterbodies being primary source of water for human consumption are being investigated for its quality globally. This study evaluated water quality in three rivers (River Nfifikh, Hassar and El Maleh) of Mohammedia prefecture, Morocco in terms of heavy metals occurrence during two seasons of winter and spring. The heavy metals analyzed were cadmium, iron, copper, zinc, and lead. Heavy metal pollution index was derived to quantify water quality and pollution. Hazard quotient and carcinogenic risk were calculated to determine possible health risk. Modelling and prediction were performed using random forest, support vector machine and artificial neural network. The heavy metal concentration was lower in the winter season than in the spring season. Heavy metal pollution index (H.P.I.) was in the range of 1.5-2 during the winter season and 2-3 during the spring season. In the Nfifikh river, Cd2+ and Fe were the main polluting heavy metal. H.Q. was < 1 in all three rivers, which signified no adverse health effect from exposure to heavy metals. However, carcinogenic risk assessment revealed that 1 in every 100 people was susceptible to cancer during the life span of 70 years. Based on the control point reference, it was found that Mohammedia prefecture as river water was already contaminated before it entered the prefecture boundary. This was again validated with the water lagoon Douar El Marja which is located near the industrial zones of Mohammedia prefecture. Future studies are required to investigate pollution of rivers prior to their entry in Mohammedia prefecture to identify potential source and adopt mitigation measures accordingly.

Bio-engineered sensing of Atrazine by green CdS quantum dots: Evidence from electrochemical studies and DFT simulations.

The present investigation reports a comprehensible and responsive strategy for identifying atrazine in several conditions using an extensive electrochemical method. CdS Quantum dots were synthesized via a greener approach, and their formation was endorsed by numerous characterization techniques such as FTIR, SEM, Raman, UV-Vis, and XRD. Owing to the splendid electrocatalytic behavior, Green CdS quantum dots (QDs) of crystallite size ∼2 nm was opted as the sensor material and were, therefore, incorporated on the bare carbon paste electrode's surface. The developed sensor demonstrated an impressive outcome for atrazine sensing accompanied by superior selectivity and sensitivity. The lower detection limit (LLOD) of 0.53 µM was attained using the developed sensor in a linear concentration range of 10-100 µM. Furthermore, the practical pertinence of the developed sensor was examined on distilled water, wastewater, and fresh liquid milk, resulting in a tremendous retrieval of atrazine (91.33-99.8%).

Algae-based approaches for Holistic wastewater management: A low-cost paradigm.

Aquatic algal communities demonstrated their appeal for diverse industrial applications due to their vast availability, ease of harvest, lower production costs, and ability to biosynthesize valuable molecules. Algal biomass is promising because it can multiply in water and on land. Integrated algal systems have a significant advantage in wastewater treatment due to their ability to use phosphorus and nitrogen, simultaneously accumulating heavy metals and toxic substances. Several species of microalgae have adapted to thrive in these harsh environmental circumstances. The potential of algal communities contributes to achieving the United Nations' sustainable development goals in improving aquaculture, combating climate change, reducing carbon dioxide (CO2) emissions, and providing biomass as a biofuel feedstock. Algal-based biomass processing technology facilitates the development of a circular bio-economy that is both commercially and ecologically viable. An integrated bio-refinery process featuring zero waste discharge could be a sustainable solution. In the current review, we will highlight wastewater management by algal species. In addition, designing and optimizing algal bioreactors for wastewater treatment have also been incorporated.

A state-of-art-review on emerging contaminants: Environmental chemistry, health effect, and modern treatment methods.

Pollution problems are increasingly becoming e a priority issue from both scientific and technological points of view. The dispersion and frequency of pollutants in the environment are on the rise, leading to the emergence have been increasing, including of a new class of contaminants that not only impact the environment but also pose risks to people's health. Therefore, developing new methods for identifying and quantifying these pollutants classified as emerging contaminants is imperative. These methods enable regulatory actions that effectively minimize their adverse effects to take steps to regulate and reduce their impact. On the other hand, these new contaminants represent a challenge for current technologies to be adapted to control and remove emerging contaminants and involve innovative, eco-friendly, and sustainable remediation technologies. There is a vast amount of information collected in this review on emerging pollutants, comparing the identification and quantification methods, the technologies applied for their control and remediation, and the policies and regulations necessary for their operation and application. In addition, This review will deal with different aspects of emerging contaminants, their origin, nature, detection, and treatment concerning water and wastewater.

Micro-mechanical and tribological behavior of Al/SiC/B4C/CNT hybrid nanocomposite.

The aluminum nanocomposite is fabricated through squeeze stir casting method where CNT, SiC/B4C powder has been used as a reinforcement in an aluminum matrix. Squeeze action in stir casting opted due to proper reinforcement of 2 vol% of CNT in the matrix. The boron carbide and silicon carbide have been added by 8 and 12 vol% in the matrix. Uniform distribution of reinforcement and phase analysis has been shown by scanning electron microscopy (SEM) and XRD analysis. The formation of intermetallic compounds like Al3BC and Al4C3, dislocation forests, and the interaction of the reinforcement with the matrix are all confirmed by transmission electron microscopy (TEM). The micro-mechanical behavior of aluminum nanocomposites was investigated using nano indentation. The nano hardness, Vickers hardness, and Young's modulus of 12 vol% B4C compared with 12 vol% of SiC are increased by 12%, 23%, and 16%, respectively, and the same trend has been observed for the 8 vol% B4C reinforced composite. The model analysis for Young's modulus has been done and the experimental value for the modulus of elasticity of the composite are validated and not find such differences significantly. The surface topography was determined, furrow scratches and wear scars, and it was discovered that B4C reinforced composites have reduced stripping pits inside the wear marks, as well as lower wear width and depth. Wear analysis is essential because abrasive encounters result in substantial damage owing to larger pits and bigger wear scars.

Effective voltammetric tool for Nano-detection of triazine herbicide (1-Chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine) by naphthalene derivative.

The development and operation of a nanosensor for detecting the poisonous 1-chloro-3-ethylamino-5-isopropylamino-2,4,6-triazine (Atrazine) are described in this study for the first time. The carbon electrode (CE) surface was modified with cysteine-substituted naphthalene diimide to create this sensitive platform. The developed nanosensor (NDI-cys/GCE) was evaluated for its ability to sense Atrazine using differential pulse voltammetry and cyclic voltammetry. To achieve the best response from the target analyte, the effects of several parameters were examined to optimize the conditions. The cysteine-substituted naphthalene diimide significantly improved the signals of the Atrazine compared to bare GCE due to the synergistic activity of substituted naphthalene diimide and cysteine molecules. Under optimal conditions, atrazine detection limits at the (NDI-cys/GCE) were reported to be 94 nM with a linear range of 10-100 µM. The developed sensing platform also showed positive results when used to detect the atrazine herbicide in real tap water, wastewater, and milk samples. Furthermore, a reasonable recovery rate for real-time studies, repeatability, and stability revealed that the developed electrochemical platform could be used for sample analysis.

Pharmacological treatment of gastro-oesophageal reflux in children.

BACKGROUND: Gastro-oesophageal reflux (GOR) is characterised by the regurgitation of gastric contents into the oesophagus. GOR is a common presentation in infancy, both in primary and secondary care, affecting approximately 50% of infants under three months old. The natural history of GOR in infancy is generally of a self-limiting condition that improves with age, but older children and children with co-existing medical conditions can have more protracted symptoms. The distinction between gastro-oesophageal reflux disease (GORD) and GOR is debated. Current National Institute of Health and Care Excellence (NICE) guidelines define GORD as GOR causing symptoms severe enough to merit treatment. This is an update of a review first published in 2014. OBJECTIVES: To assess the effects of pharmacological treatments for GOR in infants and children. SEARCH METHODS: For this update, we searched CENTRAL, MEDLINE, Embase, and Web of Science up to 17 September 2022. We also searched for ongoing trials in clinical trials registries, contacted experts in the field, and searched the reference lists of trials and reviews for any additional trials. SELECTION CRITERIA: We included randomised controlled trials (RCTs) that compared any currently-available pharmacological treatment for GOR in children with placebo or another medication. We excluded studies assessing dietary management of GORD and studies of thickened feeds. We included studies in infants and children up to 16 years old. DATA COLLECTION AND ANALYSIS: We used standard methodology expected by Cochrane. MAIN RESULTS: We included 36 RCTs involving 2251 children and infants. We were able to extract summary data from 14 RCTs; the remaining trials had insufficient data for extraction. We were unable to pool results in a meta-analysis due to methodological differences in the included studies (including heterogeneous outcomes, study populations, and study design). We present the results in two groups by age: infants up to 12 months old, and children aged 12 months to 16 years old. Infants Omeprazole versus placebo: there is no clear effect on symptoms from omeprazole. One study (30 infants; very low-certainty evidence) showed cry/fuss time in infants aged three to 12 months had altered from 246 ± 105 minutes/day at baseline (mean +/- standard deviation (SD)) to 191 ± 120 minutes/day in the omeprazole group and from 287 ± 132 minutes/day to 201 ± 100 minutes/day in the placebo group (mean difference (MD) 10 minutes/day lower (95% confidence interval (CI) -89.1 to 69.1)). The reflux index changed in the omeprazole group from 9.9 ± 5.8% in 24 hours to 1.0 ± 1.3% and in the placebo group from 7.2 ± 6.0% to 5.3 ± 4.9% in 24 hours (MD 7% lower, 95% CI -4.7 to -9.3). Omeprazole versus ranitidine: one study (76 infants; very low-certainty evidence) showed omeprazole may or may not provide symptomatic benefit equivalent to ranitidine. Symptom scores in the omeprazole group changed from 51.9 ± 5.4 to 2.4 ± 1.2, and in the ranitidine group from 47 ± 5.6 to 2.5 ± 0.6 after two weeks: MD -4.97 (95% CI -7.33 to -2.61). Esomeprazole versus placebo: esomeprazole appeared to show no additional reduction in the number of GORD symptoms compared to placebo (1 study, 52 neonates; very low-certainty evidence): both the esomeprazole group (184.7 ± 78.5 to 156.7 ± 75.1) and placebo group (183.1 ± 77.5 to 158.3 ± 75.9) improved: MD -3.2 (95% CI -4.6 to -1.8). Children Proton pump inhibitors (PPIs) at different doses may provide little to no symptomatic and endoscopic benefit. Rabeprazole given at different doses (0.5 mg/kg and 1 mg/kg) may provide similar symptom improvement (127 children in total; very low-certainty evidence). In the lower-dose group (0.5 mg/kg), symptom scores improved in both a low-weight group of children (< 15 kg) (mean -10.6 ± SD 11.13) and a high-weight group of children (> 15 kg) (mean -13.6 ± 13.1). In the higher-dose groups (1 mg/kg), scores improved in the low-weight (-9 ± 11.2) and higher-weight groups (-8.3 ± 9.2). For the higher-weight group, symptom score mean difference between the two different dosing regimens was 2.3 (95% CI -2 to 6.6), and for the lower-weight group, symptom score MD was 4.6 (95% CI -2.9 to 12). Pantoprazole: pantoprazole may or may not improve symptom scores at 0.3 mg/kg, 0.6 mg/kg, and 1.2 mg/kg pantoprazole in children aged one to five years by week eight, with no difference between 0.3 mg/kg and 1.2 mg/kg dosing (0.3 mg/kg mean -2.4 ± 1.7; 1.2 mg/kg -1.7 ± 1.2: MD 0.7 (95% CI -0.4 to 1.8)) (one study, 60 children; very low-certainty evidence). There were insufficient summary data to assess other medications. AUTHORS' CONCLUSIONS: There is very low-certainty evidence about symptom improvements and changes in pH indices for infants. There are no summary data for endoscopic changes. Medications may or may not provide a benefit (based on very low-certainty evidence) for infants whose symptoms remain bothersome, despite nonmedical interventions or parental reassurance. If a medication is required, there is no clear evidence based on summary data for omeprazole, esomeprazole (in neonates), H2antagonists, and alginates for symptom improvements (very low-certainty evidence). Further studies with longer follow-up are needed. In older children with GORD, in studies with summary data extracted, there is very low-certainty evidence that PPIs (rabeprazole and pantoprazole) may or may not improve GORD outcomes. No robust data exist for other medications. Further RCT evidence is required in all areas, including subgroups (preterm babies and children with neurodisabilities).

Experimental investigation of H3PO4 activated papaya peels for methylene blue dye removal from aqueous solution: Evaluation on optimization, kinetics, isotherm, thermodynamics, and reusability studies.

This investigation is centered on the effectiveness of methylene blue (MB), a cationic dye, adsorbed from an aqueous media by H3PO4 activated papaya skin/peels (PSPAC), with initial pH (2-10), contact time (30-180 min), MB dye concentration (varying from 10 to 50 mg/L), and MB dose (0.1-0.5 gm). The findings show that the best optimal conditions for MB dye removal occur at a 6 pH, 0.3 gm dose of PSPAC adsorbent for 10 mg/L MB dye concentration, with 90 min of contact time. To optimize and validate the extraction efficiency of MB dye, a response surface methodology (RSM) study was conducted using a central composite design (CCD) with a regression model showing R2 = 0.9940. FT-IR spectroscopy shows, CO, and O-H stretching functional groups while FE-SEM is assessed to supervise morphological features of the PSPAC adsorbent. The peak adsorption capacity with 46.95 mg/g for the Langmuir isotherm model conveniently satisfies the adsorption process with R2 = 0.9984 while with R2 = 0.999, a kinetic model, pseudo-second-order, confirms MB dye adsorption by PSPAC adsorbent. Moreover, thermodynamic parameters including ΔGᵒ, ΔH°, and ΔS° were computed and found to be spontaneous and exothermic. Furthermore, regeneration studies employed with NaOH (0.1 M) and HCl (0.1 M) solution media show an acceptable MB removal efficiency consecutive up to three cycles. The study highlights that H3PO4 papaya skin/peel (PSPAC) is an effectual, sustainable, reasonably available biosorbent to remove industrial cationic dyes disposal.